This Power cord is equipped with an L-shaped elbow European standard Schuko grounding plug (CEE 7/7 universal type) at one end and a 90 degree elbow IEC C13 product suffix socket at the other end. It strictly follows the EU EN 60884 and IEC 60320 safety standards in production and has passed CE electrical safety certification. It is suitable for 230V/50Hz power supply environments throughout Europe, including Germany, France, Spain, the Netherlands, Belgium, etc. It is designed specifically for high-power Class I equipment with C13 interface such as servers, desktop computers, displays, industrial control equipment, printers, audio hosts, etc. The double elbow structure greatly optimizes wiring in small spaces and is the mainstream standard power cord for European industrial control, office, and computer room equipment.

The plug adopts CEE 7/7 German French dual compatibility specifications, with double cylindrical conductive pins paired with side elastic grounding springs, and a reserved grounding socket on the top. It can be compatible with both German Schuko sockets and French E-type grounding sockets, covering the majority of civilian and commercial sockets in European countries, with strong universality. The size and distance between the two metal pins strictly follow the unified standards of the European Union, with tight insertion and extraction to eliminate the hidden dangers of virtual connection heating, loosening, and power failure. The grounding structure follows the safety logic of "grounding first, then powering on, power-off, and finally disconnecting from grounding". When metal shell equipment such as computers and industrial control computers experience leakage, the grounding circuit can instantly discharge the fault current, eliminating the risk of electric shock to the human body. The base of the pin is equipped with a white insulating isolation ring, which can also block live metal and reduce the probability of accidental contact and electric shock even when the plug is half pulled out. The plug adopts a 90 ° elbow outlet design, which is different from traditional straight head plugs. After inserting into the wall socket, the cable is bent parallel to the wall, greatly reducing the space for the plug to protrude outward. It is perfectly suitable for wiring restricted scenarios such as the back of cabinets, TV cabinets, equipment backs, narrow cabinet gaps, etc., to avoid internal copper wire breakage caused by long-term hard bending of wires. The tail of the plug is equipped with a multi-layer corrugated buffer wire sleeve, which disperses the pulling and bending stress of the multi-layer wrinkled structure, slowing down the aging and cracking of the wire root; Internally, a lock wire compression structure and cold pressed terminal technology are used, ensuring that the tensile strength of the wire meets the standard, and it is not easy to detach or have poor contact when dragged for a long time. The conductive pins are made of high-purity copper material stamped and formed, with nickel plating on the surface for rust and oxidation prevention. The temperature rise is stable when fully charged for a long time, and the bite is still tight after thousands of insertions and removals; The shell is made of V0 grade flame-retardant insulating plastic, which is resistant to high and low temperatures, impact, and quickly extinguishes in the event of an open flame, fully isolating internal live parts.

The tail is equipped with a same direction 90 ° elbow C13 three hole pin interface, with a standard 10A 250V specification, fully matching the C14 male interface for computer power supplies, displays, switches, amplifiers, and small industrial equipment. The elbow shape allows cables to be routed along the side of the equipment body without vertically protruding and squeezing the equipment back panel, effectively saving storage space inside the cabinet and behind the desktop equipment, organizing wiring more neatly, and preventing long-term bending and damage of cables. There are three high elasticity copper spring plates inside the product holder, with uniform and stable clamping force, which will not loosen or ignite after long-term insertion and removal; The surface of the shell is clearly engraved with rated current, voltage, and certification marks, in compliance with EU product labeling regulations. The integrated injection molded shell is seamless, dustproof and moisture-proof, suitable for dusty and constant temperature environments such as computer rooms, offices, and workshops.

The intermediate connecting cable is made of pure copper stranded conductors with low conductive loss and stable current carrying. The outer layer is thickened with PVC insulation sheath, which is flexible, wear-resistant, bending resistant and anti-aging. It is not easy to crack and harden after long-term indoor use. Before leaving the factory, the entire line must undergo a complete set of safety tests, including withstand voltage testing, insulation resistance testing, temperature rise load testing, durability testing after 10000 insertions and removals, and wire tension testing. Only when all standards are met can the line be shipped. The standard rated specification is 10A 250V, and the wire length can be customized to various sizes such as 0.3m, 0.5m, 1m, 1.5m, 2m, etc. Short lines are particularly suitable for stacking equipment in computer rooms and short distance transfer inside cabinets, while long lines meet the long-distance power supply needs of desktops and household appliances.

The product is suitable for various fields, and can be used for desktop computer hosts, monitors, all-in-one machines, printers, copiers, and projector power supply in office settings; The industrial control scenario in the computer room can be adapted to switches, routers, servers, industrial control hosts, and short line switching of testing instruments; Audio and video scenes can be equipped with power amplifiers, speakers, mixing consoles, live streaming equipment, and film and television equipment; It can also be used as a factory matching power cord and equipment maintenance replacement wire for exporting C13 interface electrical appliances to Europe. This double bend European standard power cord combines a universal European grounding plug and a space saving elbow suffix, balancing electrical safety, wide adaptability, and wiring practicality. It is an indispensable standardized power connection wire for office, industrial control, and audiovisual equipment in the European market.